Equipment Care
Follow the guidelines below to ensure the longest life and safe usage for your tanning and red light equipment.
Clean pillow.
Inspect facial glass (if applicable).
Clean and sanitize goggles.
Ensure click strip is firmly in place.
Clean pillow.
Clean and sanitize goggles.
Clean and sanitize bed exterior using Manufacturer-approved cleaning solution only (never use ammonia or bleach based cleaning solutions).
Inspect acrylic for cracks, wear, or hazing.
Clean pillow.
Remove and clean the inside of both canopy and bench acrylic sheets.
Dust lamps.
Wipe and vacuum fans and vents.
Wipe and vacuum vent hoses.
Adjust shock tension (if needed).
Check combi set bolts for proper tightness.
Check power cord and bench-to-canopy connector for tightness, wear, etc.
Clean all reflectors.
Inspect vent hoses for optimum ventilation.
Check voltage being supplied to bed to ensure it conforms with Manufacturer’s guidelines.
After each tanning session:
Clean bench and canopy acrylics.Clean pillow.
Inspect facial glass (if applicable).
Clean and sanitize goggles.
Ensure click strip is firmly in place.
Daily cleaning:
Clean bench and canopy acrylics.Clean pillow.
Clean and sanitize goggles.
Clean and sanitize bed exterior using Manufacturer-approved cleaning solution only (never use ammonia or bleach based cleaning solutions).
Inspect acrylic for cracks, wear, or hazing.
Weekly cleaning:
Clean bench and canopy acrylics.Clean pillow.
Remove and clean the inside of both canopy and bench acrylic sheets.
Dust lamps.
Wipe and vacuum fans and vents.
Wipe and vacuum vent hoses.
Adjust shock tension (if needed).
Check combi set bolts for proper tightness.
Check power cord and bench-to-canopy connector for tightness, wear, etc.
Monthly cleaning:
Clean bench and canopy acrylics.Clean all reflectors.
Inspect vent hoses for optimum ventilation.
Check voltage being supplied to bed to ensure it conforms with Manufacturer’s guidelines.